# Realize One-to-One Video Calling

This guide introduces how to achieve one-to-one video calling. API call sequence for one-to-one call is as shown below:

../../../../_images_en/1-1workflowios.jpg

# Initialize

Call JCMediaDevice create (opens new window) and JCCall create (opens new window) to initialize the modules needed for one-to-one calling:

//Initialize
-(bool)initialize {
    // 1. Media class
    JCMediaDevice *mediaDevice = [JCMediaDevice create:client callback:self];
    // 2. Call class
    JCCall *call = [JCCall create:client mediaDevice:mediaDevice callback:self];
    ...
}

Among them:

The callback in the JCMediaDevice create is the proxy object of the JCMediaDeviceCallback (opens new window) protocol, which is used to notify the upper layer of media device related events. Therefore, you need to specify the proxy object of callback first, and then implement the JCMediaDeviceCallback in the proxy object.

The main methods in the JCMediaDeviceCallback are as follows:

//Camera changes
-(void)onCameraUpdate;

//Audio output changes
-(void)onAudioOutputTypeChange:(NSString*)audioOutputType;

//Sound interruption recovery
-(void)onAudioInerruptAndResume:(BOOL)interrupt;

The callback in the JCCall create is a proxy object of the JCCallCallback (opens new window) protocol, which is used to notify the upper layer of the call-related events. Therefore, you need to specify the proxy object of callback first, and then implement JCCallCallback in the proxy object.

The main methods in the JCCallCallback are as follows:

//This callback triggers when the callItem is added
-(void)onCallItemAdd:(JCCallItem* __nonnull)item;

//This callback triggers when the call is removed
-(void)onCallItemRemove:(JCCallItem* __nonnull)item reason:(JCCallReason)reason description:(NSString * __nullable)description;

//The callback of call status update (When the upper layer receives this callback, you can obtain all the information and status of the call according to the JCCallItem object, thereby updating the call related UI)
-(void)onCallItemUpdate:(JCCallItem* __nonnull)item changeParam:(JCCallChangeParam * __nullable)changeParam;

# Media parameter setting

One-to-one video calls support the integration of smart hardware devices, and media parameters need to be set before a call is initiated:

// Generate configuration parameters according to the mode
JCCallMediaConfig *mediaConfig = [JCCallMediaConfig generateByMode:JCCallMediaConfigModeIntelligentHardware];
// Set media parameters
JCManager.shared.call.mediaConfig = mediaConfig;

Juphoon provides three configuration modes for developers to choose, and open related attributes for developers to make custom configuration. For specific methods, please see Media parameter setting .

# Make a call

To call call (opens new window) to initiate a video call, the parameters to be filled are:

userID Fill in the user ID of the other party.
video Select whether to call a video call, and true means to make a video call, while false means to make a voice call.
callParam Call parameter object, this parameter can be empty, see detailed definition: JCCallParam (opens new window).

// Initiate a video call
JCCallParam *param = [[JCCallParam alloc] init];
[call call:@"userID" video:false callParam:param];

After dialing the call, both the caller and the callee will receive the callback onCallItemAdd (opens new window) for the new call, and the call status will change to JCCallStatePending at this time. You can implement the onCallItemAdd (opens new window) method in the upper layer and handle the related logic:

// Receive a new call callback
-(void)onCallItemAdd:(JCCallItem* __nonnull)item {
    // Business logic
    if (item.direction == JCCallDirectionIn) {
        // If it is an incoming call
        ...
    } else {
        // If it is an outgoing call
        ...
    }
}

TIP

If the caller wants to cancel the call, he/she can go directly to the hang up part. After calling the hang up interface, the call status becomes the JCCallStateCancel.

# Create local video images

After initiating a call, call the startSelfVideo (opens new window) in the JCCallItem (opens new window) class to create a local video image. This method returns a JCMediaDeviceVideoCanvas (opens new window) object. This object is used to render the video to the canvas and manage the rendering method. (Calling this method will open the camera):

-(void)onCallItemAdd:(JCCallItem* __nonnull)item {
    if (item.state == JCCallStateTalking && localCanvas == nil && item.uploadVideoStreamSelf) {
        // Create local and remote video images
        JCMediaDeviceVideoCanvas *localCanvas = [item startSelfVideo:JCMediaDeviceRenderFullScreen];
        [_selfview addSubview:localCanvas.videoView];
    }
}

# Answer a call

After the caller initiates the call successfully, the called party will receive the onCallItemAdd (opens new window) callback. At this time, the video and direction properties of the JCCallItem (opens new window) object in the callback can be used to determine whether it is a video call or a voice call, so as to make corresponding processing:
```
-(void)onCallItemAdd:(JCCallItem* __nonnull)item {
    // If it is a video call and is ringing
    if (item && item.direction == JCCallDirectionIn && item.video) {
        // 2. Make corresponding processing, such as "ringing" on the interface
        ...
    }
}
```
Call answer (opens new window) to answer the call, the video call can be answered by voice or video:
```
// Answer the call
[call answer:item video:true];
```

After the call is answered, the call status changes to JCCallStateConnecting.

TIP

If you want to reject the call at this time, you can go directly to the hang up part. After calling the hang up interface, the call state becomes JCCallStateCanceled.

# Create remote video images

After the called party answers the call, the two parties will establish a connection. At this time, both the caller and the called party will receive the updated callback of the call (onCallItemUpdate), and the call state will change to the JCCallStateTalking.

Call the startOtherVideo (opens new window) in the JCCallItem (opens new window) class to create a remote video streaming. This method returns a JCMediaDeviceVideoCanvas (opens new window) object, which is used to render the video to the canvas and manage the rendering method:

-(void)onCallItemUpdate:(JCCallItem* __nonnull)item changeParam:(JCCallChangeParam * __nullable)changeParam {
    JCMediaDeviceVideoCanvas *remoteCanvas;
    // If the peer is uploading a video streaming (uploadVideoStreamOther)
    if (item.state == JCCallStateTalking && remoteCanvas == nil && item.uploadVideoStreamOther) {
        // Remote video rendering
        remoteCanvas = [item startOtherVideo:JCMediaDeviceRenderFullScreen];
        [_remoteVideo addSubview:remoteCanvas.videoView];
    }
}

# Hang up a call

Both the calling party and the called party can hang up the call.

First call getActiveCallItem (opens new window) to get the currently active call object;

After obtaining the current active call object, call term (opens new window) to hang up the current active call:

// 1. Get the current active call
JCCallItem *item = [call getActiveCallItem];
// 2. Hang up the current active call
[call term:item reason:JCCallReasonNone description:@"Caller hangs up"];

# Destroy local and remote video images

After the call is hung up, the onCallItemRemove callback in JCCallCallback (opens new window) will be triggered, and the call state will change to JCCallStateOk. At this time, you need to call the stopSelfVideo (opens new window) and stopOtherVideo (opens new window) methods to destroy the local and remote video images:

```
 -(void)onCallItemRemove:(JCCallItem* __nonnull)item reason:(JCCallReason)reason description:(NSString * __nullable)description { //The callback of removing the call
// Interface processing
if (localCanvas) {
    // Local video destruction
    [item stopSelfVideo];
}
if (remoteCanvas) {
    // Remote video destruction
    [item stopOtherVideo];
}
}
```